|
Home
|
E-Submission/Review
|
Sitemap
|
Editorial Office
|
목적 및 범위
Aims and Scope
저널 정보
About the Journal
편집위원회
Editorial Board
Open Access
편집국
Editorial Office
논문투고안내
Instructions for Authors
연구윤리규정
Research and Publication Ethics
필수 점검 사항
Checklist
논문투고사이트
E-Submission
저작권이양동의서
Copyright Transfer Agreement
발간호 검색
All issues
출판전 논문
Online First
현재 발행 호
Current Issue
많이 읽힌 논문
Most Read Articles
많이 인용된 논문
Most Cited Articles
개별 논문 검색
Korean J. Met. Mater.
Search
저자 색인
Author Index
Korean Journal of Metals and Materials
Search
> Browse Articles > Search
Effects of Superheating Treatment on the Microstructure, Tensile and Thermal Conductivity Properties of Fe-Bearing Al-10Si-Mg Casting Alloy
Fe 함유 Al-10Si-Mg 주조 합금의 미세조직, 인장 및 열전도도 특성에 미치는 과열 처리의 효과
Jin-Hyeok Jang, Tae-Hoon Kang, Kwang-jun Euh, Young-Hee Cho, Kee-Ahn Lee장진혁, 강태훈, 어광준, 조영희, 이기안
Korean J. Met. Mater.
2024;62(5):402-410. Published online 2024 May 5
DOI:
https://doi.org/10.3365/KJMM.2024.62.5.402
Abstract
In this study, we designed and manufactured a new Fe-bearing Al-10Si-Mg casting alloy (F alloy) and investigated its microstructure, mechanical properties, and thermal conductivity. Two types of Fe-bearing Al-10Si-Mg alloys were used: the Conventional-F alloy, injected at 720 ℃ and cooled by water quenching, and the Superheated-F alloy, heated to.....
More
An Examination of Bronze Vessel Technology in the Unified Silla Period: Case Study on the Bronzes Excavated from Gwanbuk-ri Site in Buyeo
통일신라 청동용기류의 제작기술 고찰: 부여 관북리 백제유적 출토 유물을 중심으로
So Jin Kim, Woo Rin Han, Young Do Kim김소진, 한우림, 김영도
Korean J. Met. Mater.
2024;62(5):393-401. Published online 2024 May 5
DOI:
https://doi.org/10.3365/KJMM.2024.62.5.393
Abstract
Archaeological excavations in Buyeo had revealed Bronze vessels interred within a hole in the building at the Gwanbuk-ri site. These bronze vessels are dated to the Unified silla period (9-10th centuries). To identify the bronze vessels’ manufacturing technology, metallurgical analyses were carried out using Optical Microscopy, SEM-EDS and EPMA. The.....
More
Friction and Wear Behavior of Selective Laser Melted Ti6Al4V-Equine Bone Nanocomposites
선택적 레이저 용융 Ti6Al4V-Equine Bone 나노 복합재료의 마찰 및 마모 특성
Se-Hee Kim, Su-Hyun Bae, Sang-Bae Park, Hoon Seonwoo, Se-Eun Shin김세희, 배수현, 박상배, 선우훈, 신세은
Korean J. Met. Mater.
2024;62(5):351-359. Published online 2024 May 5
DOI:
https://doi.org/10.3365/KJMM.2024.62.5.351
Abstract
Ti6Al4V is commonly used in implants because of its excellent mechanical properties, corrosion resistance, and biocompatibility. While Hydroxyapatite (HAp) is typically used for strong biological bonding between Ti6Al4V implants and bone tissue, this study takes a different approach by incorporating Equine Bone (EB), which has a chemical structure similar to.....
More
Enhancement of Flexural Strength by Slip Casting Cordierite Ceramics with h-BN Nanoparticles
Chul Oh Park, Jong Hyun Lee, Dong Kyun Lee, Hyun Jun Cho, Sung Hwan Yim, Kyu Hyoung Lee
Korean J. Met. Mater.
2024;62(4):306-311. Published online 2024 Mar 29
DOI:
https://doi.org/10.3365/KJMM.2024.62.4.306
Abstract
In this study, we enhanced the flexural strength of cordierite ceramics by incorporating h-BN (hexagonal boron nitride) nanoparticles, facilitated by the slip casting process. Initially, commercial cordierite powder with an average particle size of 10 mm underwent a ball-milling process to reduce the size to 2.5 mm and simultaneously achieve.....
More
A Novel Al-Al
2
O
3
Non-Skid Composite Coating with Improved Wear Resistance Fabricated by Twin Wire Arc Spraying
Twin wire arc spray 공정을 통해 제작된 Al-Al
2
O
3
복합소재 미끄럼 방지 코팅의 우수한 마모 저항성
Hansol Kwon, Youngjin Park, Yongjin Kang, Dohyun Kim, Uk Hee Nam, Eungsun Byon권한솔, 박영진, 강용진, 김도현, 남욱희, 변응선
Korean J. Met. Mater.
2024;62(4):257-266. Published online 2024 Mar 29
DOI:
https://doi.org/10.3365/KJMM.2024.62.4.257
Abstract
In this study, novel non-skid Al-Al
2
O
3
coatings with improved wear resistance were fabricated using twin wire arc spray (TWAS). TWAS Al coating was prepared as a reference sample and representative TWAS parameters (working distance, process gas pressure, arc current) were controlled to fabricate different Al-Al
2
O
3
coatings. The Al-Al
2
O
3
coatings showed.....
More
Development of Electrolyte with Enhanced Corrosion Resistance for Sn Electroplating on Multi-Layer Ceramic Capacitors
고신뢰성 적층 세라믹 커패시터를 위한 침식방지형 주석도금액 개발
Bonil Ku, Junseong Kim, Yujin Son, Kyeongseok Min, Sung-Hyeon Baeck구본일, 김준성, 손유진, 민경석, 백성현
Korean J. Met. Mater.
2024;62(3):180-189. Published online 2024 Mar 5
DOI:
https://doi.org/10.3365/KJMM.2024.62.3.180
Abstract
Capacitors not only store and release electricity but selectively conduct alternating current. Among the various types of capacitors, multi-layer ceramic capacitors (MLCCs) have been widely used in automotive, smartphone, and wearable devices because of their compact size and high capacitance capabilities. In this study, we have developed an electrolyte for.....
More
Control of Self-Assembly and Elemental Mixing of AuNi Bimetallic Nanoparticles via Solid-State and Liquid-State Dewetting of Metal Thin Films
금속박막의 고상 및 액상 비젖음 공정을 통한 AuNi 이종금속 나노입자의 자기 정렬 및 성분 혼합 제어
Yoon Hwan Moon, Jong Geun Park, Yong Jun Oh문윤환, 박종근, 오용준
Korean J. Met. Mater.
2024;62(1):51-56. Published online 2023 Dec 29
DOI:
https://doi.org/10.3365/KJMM.2024.62.1.51
Abstract
Immiscible Au-Ni alloy thin films undergo phase separation and dewetting because of thermodynamic and morphological instability at elevated temperatures below the miscibility gap. We report the formation and assembly of bimetallic nanoparticles (BNPs) on topographic Si templates. An ordered array of inverted pyramidal pits were produced via solid-state and liquid-state.....
More
The Effect of Ni Interlayer Formation Plating Bath on the Suppression of Oxidation of Ag-Coated Cu Flakes
Ag 코팅 Cu 플레이크의 산화 억제에 미치는 Ni interlayer 형성 도금욕의 영향
Ji Hwan Kim, Jong-Hyun Lee김지환, 이종현
Korean J. Met. Mater.
2023;61(10):748-759. Published online 2023 Sep 25
DOI:
https://doi.org/10.3365/KJMM.2023.61.10.748
Abstract
To suppress Ag dewetting from around 200
o
C in Ag-coated Cu (Cu@Ag) flakes, Ag and Ni-coated Cu (Cu@Ni@Ag) flakes were fabricated by successive Ni and Ag electroless plating. The Ni bath type was an important consideration to induce differences in the Ag dewetting and resultant Cu oxidation. An acid Ni.....
More
Research on Thermal Properties and High Temperature Exposure Behavior of Non-Skid Coating Fabricated by Twin Wire Arc Spraying
Twin wire arc spray 용사코팅 공정을 통해 제작된 미끄럼 방지 코팅의 열적 특성 및 고온노출 거동 연구
Hansol Kwon, Youngjin Park, Uk Hee Nam, Eungsun Byon권한솔, 박영진, 남욱희, 변응선
Korean J. Met. Mater.
2023;61(9):642-651. Published online 2023 May 14
DOI:
https://doi.org/10.3365/KJMM.2023.61.9.642
Abstract
Conventional non-skid coatings for marine construction contain polymeric materials. These materials are generally susceptible to high temperature environments because of their low thermal conductivity and thermal resistance. A metal-based non-skid coating has great potential for high temperature applications, yet, there has only been limited research. In this study, twin wire.....
More
Web of Science 1
Crossref 1
Stretchable Energy Harvesting Device based on Thermoelectric Composite Films
열전 복합체 필름을 이용한 스트레쳐블 에너지 하베스팅 소자 개발
Cheol Min Kim, Kwi-Il Park김철민, 박귀일
Korean J. Met. Mater.
2023;61(8):594-601. Published online 2023 Jul 20
DOI:
https://doi.org/10.3365/KJMM.2023.61.8.594
Abstract
Thermoelectric energy harvesting has attracted a lot of attention for powering self-powered devices because of the potential to generate energy anywhere with a temperature difference. In particular, a stretchable thermoelectric generator (S-TEG) can be applied to the repetitively moving parts of a machine and even a human body. Herein, we.....
More
Utilizing Dip-Coating to Fabricate Gate Dielectric and Semiconductor for Thin-Film Transistors
딥코팅 방법을 활용한 게이트 산화물 유전체 및 반도체 박막의 제조 및 박막트랜지스터 응용
Yongwan Kim, Young-Geun Ha김용완, 하영근
Korean J. Met. Mater.
2023;61(8):581-588. Published online 2023 Jul 20
DOI:
https://doi.org/10.3365/KJMM.2023.61.8.581
Abstract
The potential applications of advanced electronic materials in large-area, printable, and flexible electronics have generated significant interest. However, creating high-performance, low-voltage thin-film transistors (TFTs) for these applications remains difficult due to a lack of advanced gate dielectric and semiconductor materials that meet both ease-of-fabrication requirements and high electrical performance. In.....
More
Effects of Sn and In Double-Doping on the Thermoelectric Performance of Cu
3
Sb
1-x-y
Sn
x
In
y
S
4
Famatinites
Sang Yun, Il-Ho Kim
Korean J. Met. Mater.
2023;61(5):355-362. Published online 2023 Apr 20
DOI:
https://doi.org/10.3365/KJMM.2023.61.5.355
Abstract
Famatinite (Cu
3
SbS
4
) is a promising p-type thermoelectric material because of its low lattice thermal conductivity and high Seebeck coefficient. In this study, famatinite powders, double-doped with Sn (a B
IV
group element) and In (a B
III
group element) to give Cu
3
Sb
1-x-y
Sn
x
In
y
S
4
(0.02 ≤ x ≤ 0.12 and 0.06 ≤.....
More
Web of Science 1
Crossref 2
Effect of Potassium Carbonate Additives on the Properties of Copper Foils Electroplated at High Current Density
고전류밀도에서의 탄산칼륨 첨가제의 전해동박 특성에 미치는 영향
Tae-Gyu Woo, Il-Song Park우태규, 박일송
Korean J. Met. Mater.
2023;61(5):347-354. Published online 2023 Apr 20
DOI:
https://doi.org/10.3365/KJMM.2023.61.5.347
Abstract
The amount and kind of additives in electrolytes play a very important role on the electroplating of Cu foil, which is used as a cathode materials for secondary batteries. As the use of Cu foil increased, various studies on the electroplated Cu foil are urgently needed. We studied surface characteristics.....
More
A Study on the History of Advances in Ancient Iron Making Based on Correlation of Oxides in Slag
슬래그 내 산화물의 상관관계로 보는 고대 제철 발전사 연구
Gwang Seob Oh, Won Seop Jung오광섭, 정원섭
Korean J. Met. Mater.
2023;61(4):291-300. Published online 2023 Mar 22
DOI:
https://doi.org/10.3365/KJMM.2023.61.4.291
Abstract
A lot of slag was produced by ancient production processes such as smelting, melting, and refining. Iron slag has information that can be used to determine the characteristics of the site, the iron-making process and manufacturing date, but there is a limit to reading information through visual observation and nondestructive.....
More
Crossref 1
Effect of Sulfur Contents in NiZnS Composite Photocatalysts on Solar Water Splitting
황 함량 변화가 NiZnS 복합광촉매의 태양광 물분해 효율에 미치는 영향
Joo Hyun Kim, Eun seon Kang, Jung Hyeun Kim김주현, 강은선, 김정현
Korean J. Met. Mater.
2023;61(4):284-290. Published online 2023 Mar 22
DOI:
https://doi.org/10.3365/KJMM.2023.61.4.284
Abstract
Solar energy is attracting much attention as an eco-friendly source for future energy needs. Herein, NiZnS photocatalysts were synthesized with a hydrothermal method at various sulfur contents. The ZnS material is widely used as a photocatalyst because of its high stability, low toxicity, and excellent charge separation characteristics. Nickel is.....
More
Method of Suppressing Solidification Cracking by Laser Surface Melting and Epitaxial Growth Behavior for Directionally Solidified 247LC Superalloy
레이저 급속 표면용융에 따른 일방향응고 247LC 초내열합금의 에피택셜 성장 및 응고균열 억제 방안
Kyeong-Min Kim, Eun-Joon Chun김경민, 천은준
Korean J. Met. Mater.
2023;61(4):252-260. Published online 2023 Mar 22
DOI:
https://doi.org/10.3365/KJMM.2023.61.4.252
Abstract
In this study, the relationship between solidification cracking and epitaxial growth behavior with the high-speed laser surface melting of a directionally solidified 247LC superalloys was fundamentally and metallurgically investigated, to develop a successful welding procedure for the next generation of gas turbine blades. Under typical laser surface melting conditions (scan.....
More
Web of Science 1
Crossref 2
Fabrication of Ruthenium-Based Transition Metal Nanoparticles/Reduced Graphene Oxide Hybrid Electrocatalysts for Alkaline Water Splitting
루테늄 기반 전이금속 나노입자/환원된 산화그래핀 혼성체를 이용한 알칼리 수전해 촉매 합성
Eun Been Lee, Seung Geun Jo, Sang Jun Kim, Gil-Ryeong Park, Jung Woo Lee이은빈, 조승근, 김상준, 박길령, 이정우
Korean J. Met. Mater.
2023;61(3):190-197. Published online 2023 Feb 24
DOI:
https://doi.org/10.3365/KJMM.2023.61.3.190
Abstract
Green hydrogen has attracted significant attention as one of the future energy sources because no greenhouse gases are emitted during production and its energy density is much higher than fossil fuels. Precious metals such as platinum (Pt) and iridium (Ir)-based catalysts are commonly used for water splitting catalysts. However, because.....
More
Web of Science 1
Crossref 2
All-Solution-Processed OLEDs Using Printed Ag Electrodes and a PEI Bonding Layer
은 인쇄 전극과 PEI 접착 층을 사용한 용액공정 OLED
Cheol-Hee Moon문철희
Korean J. Met. Mater.
2023;61(3):175-182. Published online 2023 Feb 24
DOI:
https://doi.org/10.3365/KJMM.2023.61.3.175
Abstract
We demonstrated a bonding technology using polyethyleneimine (PEI) as a bonding layer between printed Ag electrodes and an emission material layer (EML) to fabricate all-solution-processed Organic LightEmitting Diodes (OLEDs). We manufactured Ag electrodes on a glass substrate by the screen printing method, which was bonded to another substrate with ITO.....
More
Web of Science 1
Crossref 1
Bandgap Reduction and Enhanced Photoelectrochemical Water Electrolysis of Sulfur-doped CuBi
2
O
4
Photocathode
Eunhwa Kim, Sanghan Lee, Sangwoo Ryu
Korean J. Met. Mater.
2023;61(2):115-119. Published online 2023 Jan 27
DOI:
https://doi.org/10.3365/KJMM.2023.61.2.115
Abstract
As interest in hydrogen energy grows, eco-friendly methods of producing hydrogen are being explored. CuBi
2
O
4
is one of the p-type semiconductor cathode materials that can be used for photoelectrochemical hydrogen production via environment-friendly water electrolysis. CuBi
2
O
4
has a bandgap of 1.5 – 1.8 eV which allows it to photogenerate electrons.....
More
Predicting Grain Structure in Continuously-Cast Stainless Steel Slab
연속주조 스테인리스강 슬라브의 결정립 조직 예측
Hee-Soo Kim, Ji-Joon Kim김희수, 김지준
Korean J. Met. Mater.
2023;61(1):60-68. Published online 2022 Dec 28
DOI:
https://doi.org/10.3365/KJMM.2023.61.1.60
Abstract
Macrostructural features in continuously-cast stainless steel slabs such as the distribution of equiaxed and columnar grains, and microporosity, are crucial to the post-processes, and the mechanical properties of the final steel products. Among the methods for controlling grain structure during the continuous casting process, the application of electromagnetic stirring (EMS).....
More
Web of Science 1
Crossref 1
Discrepancies in Nanoindentation Hardness and Modulus with a Berkovich, a Cube-corner, and a Conical Tip in a Cu(In,Ga)Se
2
Light-Absorption Layer
Berkovich 압자와 Cube-corner 및 Conical shape 압자를 이용해서 얻은 Cu(In,Ga)Se
2
광흡수층 박막의 탄성계수 및 경도의 불일치에 대한 고찰
Yeojin Kang, Wonjung Park, Mao Zhang, Dayoung Yoo, Dongyun Lee강여진, 박원정, 장마오, 유다영, 이동윤
Korean J. Met. Mater.
2022;60(12):884-891. Published online 2022 Nov 25
DOI:
https://doi.org/10.3365/KJMM.2022.60.12.884
Abstract
In this study, we tried to understand the difference in the mechanical properties (elastic modulus, E & hardness, H) values of CIGS compound semiconductors measured using the Berkovich indenter and the sharper cube corner and conical indenter. Adopted continuous stiffness measurement technique to characterize it along with the indentation depth......
More
Recovery of Palladium Metal with High Purity by Selective Reduction from Inorganic Acid Leaching Solutions of Cemented Zinc
아연치환체의 무기산 침출액에서 선택적 환원에 의한 고순도 팔라듐금속의 회수
Si Jeong Song, Viet Nhan Hoa Nguyen, Man Seung Lee송시정, Viet Nhan Hoa Nguyen, 이만승
Korean J. Met. Mater.
2022;60(11):837-844. Published online 2022 Oct 31
DOI:
https://doi.org/10.3365/KJMM.2022.60.11.837
Abstract
A small amount of Pd(II) present in spent electroplating solutions is concentrated by cementation. In this work, a process was developed to recover pure palladium metal by selective reduction from the hydrochloric and the sulfuric acid leaching solutions of cemented zinc. For this purpose, hydrazine and ascorbic acid were employed.....
More
Web of Science 1
Crossref 1
An Optimization of Manufacturing Process of SS304L Using Direct Energy Deposition Method
DED 공정에서의 SS304L 적층 조건 최적화
Sung Eun Kim, Sung Chan Yoo, Hyun-Gil Kim김성은, 유승찬, 김현길
Korean J. Met. Mater.
2022;60(11):819-826. Published online 2022 Oct 31
DOI:
https://doi.org/10.3365/KJMM.2022.60.11.819
Abstract
The direct energy deposition (DED) method is an emerging manufacturing technique that has been recently highlighted due to its capabilities to coat materials with complex geometry for high temperature and highly corrosive environmental applications, such as steam turbine blade. Amongst metallic materials, SS304L has been reported to have superior corrosion.....
More
Web of Science 4
Crossref 4
Comparative Analysis of Microstructure and Collision Performance of TWB Hot Stamped Parts with Various Strength Combinations
강도조합에 따른 TWB 핫스탬핑 부품의 미세구조 및 충돌성능 비교 분석
Chang Wook Lee, Yeonjung Hwang, Uk Heo, Byung Gil Yoo, Ji Hong Yoo, Taejeong Kim, Kwang Min Yoon이창욱, 황연정, 허욱, 유병길, 유지홍, 김태정, 윤광민
Korean J. Met. Mater.
2022;60(11):801-810. Published online 2022 Oct 31
DOI:
https://doi.org/10.3365/KJMM.2022.60.11.801
Abstract
Hot stamping technology has been steadily developed because it provides both excellent formability and high strength. With the development of TWB hot stamping technology, it is now possible to freely apply the required strength and thickness in the right place. In this study, the microstructure and collision performance of TWB.....
More
Web of Science 1
Crossref 2
Effects of Fillers on the Hydration Behaviors of Tricalcium Silicate Scaffolds Fabricated by Fused Deposition Modeling
Yeongjin Koo, Yoonjoo Lee, Myung-Hyun Lee, Seog Young Yoon구영진, 이윤주, 이명현, 윤석영
Korean J. Met. Mater.
2022;60(9):685-693. Published online 2022 Aug 30
DOI:
https://doi.org/10.3365/KJMM.2022.60.9.685
Abstract
With the development of additive manufacturing technology, many types of materials are being utilized, and methods of printing the materials and characteristics of their hydration properties are being studied in the fields of construction and biotechnology. Tricalcium silicate (C3S), which is used as a cement material or biomaterial, is a.....
More
Optimization of Holographic Imprinting Process for Metallic Glass using Thermoplastic Forming
열가소성 성형을 이용한 비정질 합금의 홀로그램 임프린팅 공정 최적화
Wook Ha Ryu, Chae Woo Ryu, Kyung Jun Kim, Min Kyung Kwak, Eun Soo Park류욱하, 류채우, 김경준, 곽민경, 박은수
Korean J. Met. Mater.
2022;60(9):644-653. Published online 2022 Aug 30
DOI:
https://doi.org/10.3365/KJMM.2022.60.9.644
Abstract
The thermoplastic forming (TPF) process of metallic glass (MG) is a unique and powerful method that cannot be performed using conventional crystalline alloys. Because the mechanical and thermal properties of MGs are more favorable with smaller sample sizes, TPF is particularly useful for microscale and nanoscale part molding and micro-patterning......
More
Web of Science 1
Crossref 1
Improvement of Photoelectrochemical Properties of CuO Photoelectrode by Li Doping
Li 도핑에 따른 CuO 광전극의 광전기화학적 특성 개선 연구
Seongchan Bae, Sunghyeok Lee, Hyukhyun Ryu, Won-Jae Lee배성찬, 이성혁, 류혁현, 이원재
Korean J. Met. Mater.
2022;60(8):577-586. Published online 2022 Jul 12
DOI:
https://doi.org/10.3365/KJMM.2022.60.8.577
Abstract
We fabricated a Li doped CuO photoelectrode by doping CuO with Li to improve the photoelectrochemical properties of the CuO photoelectrode. The fabricated Li doped CuO photoelectrode was optimized by experimentally investigating Li doping concentration, annealing temperature, and spin coating deposition cycle. It was confirmed that Li doped CuO had.....
More
Web of Science 2
Crossref 3
A Study on Reduced Graphene Oxide in Large-area Transparent Heaters for Defrosting
성에 제거용 대면적 투명 히터를 위한 환원된 산화 그래핀 연구
Seung Geun Jo, Hae-In Moon, Young Won Kim, Hwan Soo Dow, Jung Woo Lee조승근, 문해인, 김영원, 도환수, 이정우
Korean J. Met. Mater.
2022;60(8):570-576. Published online 2022 Jul 12
DOI:
https://doi.org/10.3365/KJMM.2022.60.8.570
Abstract
Transparent heaters are promising devices because of their versatile applications in vehicles, smart windows, and sensors, etc. Indium tin oxide is widely used for transparent heater materials due to its high electronic conductivity and visible light transmittance. However, the cost of indium is too high, and its fabrication needs sophisticated.....
More
Web of Science 1
Crossref 2
Enhancement of thermoelectric power factor by modulation doping of bulk polycrystalline SnS / thin film PEDOT:PSS bilayer
벌크 다결정 SnS / PEDOT:PSS 박막 이중층에서의 변조 도핑을 통한 열전 역률 강화
Dongwook Lee이동욱
Korean J. Met. Mater.
2022;60(7):531-536. Published online 2022 Jun 3
DOI:
https://doi.org/10.3365/KJMM.2022.60.7.531
Abstract
Modulation doping occurs in a heterojunction where a charge carrier-rich material transfers charge to a carrier-deficient material. The modulation-doped material is intentionally selected to have higher charge carrier mobility than the modulation dopant material, so that the overall electrical conductivity can be boosted. Although this modulation doping strategy has proven.....
More
Web of Science 2
Crossref 2
Electrochemical Performance of the Ni-Fe Based Metal-Support Solid Oxide Fuel Cell with Ba-Sr-Co-Fe-O and La-Sr-Mn-O Cathodes
Ba-Sr-Co-Fe 산화물과 La-Sr-Mn 산화물 양극을 포함하는 Ni-Fe 기반 금속지지형 고체산화물 연료전지의 전기화학적 성능
Sang Eun Lee, Jun Seo Park, Hee Jung Park이상은, 박준서, 박희정
Korean J. Met. Mater.
2022;60(7):523-530. Published online 2022 Jun 3
DOI:
https://doi.org/10.3365/KJMM.2022.60.7.523
Abstract
Unlike conventional solid oxide fuel cells (SOFCs) where ceramic materials have been used as a support, in this study a new SOFC structure with a metal support and a contact layer between the support and anode is suggested. A mixture of Ni-Fe alloy and zirconia ceramics as the contact layer.....
More
Web of Science 1
Crossref 1
1
|
2
|
3
|
4
|
5
|
6
|
Journal Impact Factor 1.2